SFP 1.25Gb/s switched backplanes

RoHS-compliant transceiver module is able to access the physical layer IC (PHY) via I2C interface. Additionally, the device features Baseline Wander correction to recover data in a worst-case network environment, and an automatic medium-dependent interface crossover (auto-MDIX) feature. In 1000BASE-T and 100BASE-TX modes, the transmit data stream is scrambled to reduce radiated emissions and to ensure that there is no correlation between symbols in the data stream.Supporting 10/100/1000 Mbps data-rate in excess of 100 meters (325 feet) reach over UTP Category 5/5e cables, the robust SFP-1GBT-05 transceiver module is ideally suited for implementing small form-factor Network Interface Cards (NICs) and uplinks. As such, it is highly appropriate for use in such high-density applications as LAN 1000BASE-T, switch-to-switch interfaces, switched backplanes, blade servers, gaming devices, and router/server interfaces.The Model OTOLS-13, OTOLS-15 and OTOLS-CW small form pluggable (SFP) transceivers operate at 10GTEK offers SFP 1.25Gb/s and are compatible with gigabit Ethernet and 1000BASE-T standards. The link uses a two-wire serial communication protocol based on current industry requirements. The compact metallic QSFP-H40G-​CU1M – Compatible Cisco 40GbE QSFP+ QDR Direct-Att​ach Copper Cable 1m enclosure includes a standard LC connector and can be ordered for 1310nm, 1550nm, or CWDM transport.