limits the transmission OS1 Simplex Patch Cord few reflections

OS1 Simplex Patch Cord is a single tight buffer cable available in both singlemode and multimode type. These cables are optimized for ease of connectorization and used as jumpers in intrabuilding distribution. Go4Fiber offers choices of well-known brand as well as some quality economic alternatives. All cables meet industry performance specifications. The jacket colour of singlemode and multimode cables are yellow and orange respectively. Custom cable jacket colours and special fiber types are available for nearly all cables below.The OS1 Simplex Patch Cord Pigtail fiber end to orange, and transmission distance is 500m, suitable for short distance connectivity. And SM 9/125 Pigtail is the typically single-mode fiber patch cable, with yellow end. The single-mode fiber patch cords have two kinds of wavelength, 1310 nm and 1550 nm, and transmission distance of 10 km and 40 km respectively. multi-mode fiber with in small volume, short-range system, OS1 Simplex Patch Cord for the trunk, large capacity, long-distance single-mode fiber core diameter of system is generally , and is  multimode. Single-mode and multimode wavelengths are relatively specific terms, the same fiber at different wavelengths may also be multi-mode single-mode.so the dispersion decreases, bandwidth increases, the transmission distance has also been extended. However, accompanying the light-side equipment prices higher than the bandwidth of single-mode OS1 Simplex Patch Cord. Multimode fiber by a high pulse signal extension mode (dispersion) of relatively large, while the single-mode fiber between a good model to solve the problem of dispersion. SMF CORE 8.3-9.3 um. MFD usually 9.3um